IMPROVE MY GAME
Articles
An Amateur's Titleist Performance Experience: How Club Fit Can Support Swing Mechanics
One of the most common requests on our YouTube channel is to see our assessment with an amateur golfer. We've shown how it works for Tour players, but what can it reveal for everyday golfers? So we put together a video with an amateur named Bruce Dunbar to show how important it is to assess not just swing mechanics, but physical capabilities and equipment too.
Bruce Dunbar came to TPI looking for more consistent iron play. As Dave Phillips worked through his assessment, it became clear that Bruce’s equipment was making that goal harder to achieve.
A former Division I swimmer, Bruce was accustomed to competing at a high level. Golf had been more frustrating. He felt comfortable with his driver and shorter irons, but his longer irons and fairway woods were consistently weaker parts of his game.
Dave saw a connection between how Bruce moved and where he struggled. His irons added another challenge: their strong lofts were producing a flight that was difficult for him to control and encouraging the compensations Dave wanted to address.
Understanding the body behind the swing
Like every Titleist Performance Experience, the visit began with an interview and physical screen. Bruce could perform many of the movements Dave assessed, but he presented with tight hips, particularly the trail hip, with additional restrictions through his thoracic spine and shoulders.
Those findings gave Dave a starting point for understanding Bruce’s swing. Rather than loading into his trail side during the backswing, Bruce tended to move toward the target early. Dave explained that the lab data showed his pelvis moving approximately five inches toward the target in the backswing, followed by another two inches in the downswing.
This excessive movement towards the target in the backswing is a strong Body-Swing Connection. Instead of rotating into his trail hip, he avoided it, likely because he had limited mobility. By the time he needed to move toward the target, he was already well onto his lead side. To give the club time to catch up, he slowed his body and released the club early, contributing to the scooping action and inconsistent iron contact Dave observed.
The pattern also helped explain the strengths in Bruce’s game. Staying more on his lead side worked well for more lofted clubs or finesse shots around the green. With driver, a wider stance and more forward ball position helped him stay behind the ball and deliver the club more effectively.
How the club fit compounded the problem
Bruce arrived at TPI with a 7-iron that had 28 degrees of loft. This is a common trend in the industry. Stronger loft can increase ball speed, but that doesn't always translate to more useful ball flight.
For his delivery, the resulting flight was too low and lacked the spin he needed to help hold greens. A shot could travel a respectable distance and still be difficult to control once it landed.
Dave was concerned about how Bruce would respond to that flight. If he saw the ball coming out too low, he could back up or scoop the club to help it into the air. His equipment could actually encourage the very movement he was working to change.
Our team tested an iron with 32.5 degrees of loft. In the initial comparison, Bruce was able to maintain roughly the same carry distance while producing substantially more spin.
| Original Iron | New Iron | |
|---|---|---|
| Loft | 28° | 32.5° |
| Spin | ~4,500 RPM | ~6,000 RPM |
| Carry Distance | ~145 yards | ~145 yards |
That gave Bruce a more useful flight for approaching a green. The goal was to carry the required distance with enough control to stop the ball near the target.
Giving a better movement a better result
Dave liked several parts of Bruce’s existing swing, including the compact backswing and the way he kept the club in front of his body. Those features suited his available mobility. Build your swing around what your body can do, as we like to say.
The immediate priority was helping him load into his trail side more effectively. To make that movement more accessible, Dave flared Bruce’s trail foot and adjusted his starting position. Whenever we had an opportunity to change setup, we're quick to do it. In our experience, it's one of the least invasive changes we can make.
As the movement improved with the new club, we saw a shot reaching approximately 84 feet in height, compared with about 65 feet in the earlier comparison, with similar spin and slightly more carry. That higher flight reflected the combination of the swing work and equipment change.
The club now gave Bruce useful feedback. When he made the movement Dave wanted, the ball flight rewarded it. Dave’s concern was that returning to the original equipment could draw Bruce back toward the compensations they had been addressing.
There was still work to do. Dave recommended a mobility program addressing Bruce’s hips and upper body, continued swing work and a full fitting as those changes progressed.
Bruce’s session illustrates why club fitting belongs in the same conversation as instruction and physical assessment. In his case, additional loft supported the swing change by making the desired flight easier to produce. Understanding his body helped Dave choose a movement Bruce could make, and understanding his equipment helped ensure that movement produced a useful result.
If you're a golfer interested in a physical assessment, you can connect with a TPI Certified expert via our Find an Expert page.